<<<返回首页

支持系统：Windows 

音源厂商：https://wavearts.com/products/plugins/tube-saturator-2

独立安装程序 PC

文件大小：66MB

真实的电子管温暖和失真
Tube Saturator 2 是一款超精准的电子管前置放大器电路模拟器，配备模拟均衡器，可轻柔过载以获得温暖效果，或调高音量以获得饱满的失真效果。与其前身 Tube Saturator Vintage 一样，TS-2 基于电路模拟技术，能够捕捉模拟电路的每一个细微差别。

由各个电子管、电阻器和电容器组成的电路被转换成数学方程组，并通过数值求解产生与真实电路完全相同的声音。原版软件消耗大量 CPU 资源实时计算解，而 TS-2 则使用大量预先计算的解表。TS-2 的饱和部分运行速度比原版软件快约 7 倍，但建模更加精确。TS-2 包含许多吉他放大器中常见的三段 Baxandall 型均衡器的原始电路模拟。

TS-2 还具有许多其他功能。您可以在 12AX7 和 12AU7 电子管之间切换，以获得不同的谐波特性。EQ 可以切换为饱和前或饱和后运行。饱和度和 EQ 可单独切换。此外，它还具有采用高质量重采样算法的 2 倍过采样模式。使用 2 倍模式可以衰减混叠失真谐波。使用混音控制可将处理后的声音与原始声音混合。最后，TS-2 拥有精美的界面。

亮点
采用电路仿真技术的精确电子管前置放大器模拟器
两个共阴极前置放大器级
12AX7 和 12AU7 电子管模型
用于失真调节的驱动控制
Baxandall 三段模拟 EQ
饱和度和 EQ 旁路开关
高品质 2 倍过采样模式
干湿混音控制
模拟式电平表
无延迟
高达 192 kHz 采样率
单声道或立体声

Authentic tube warming and distortion
Tube Saturator 2 is a super accurate circuit simulation of a tube pre-amp with analog EQ, which can be overdriven gently for warming effects, or cranked for fat distortion. Like its predecessor, Tube Saturator Vintage, TS-2 is based on circuit simulation technology to capture every nuance of an analog circuit.

The circuit consisting of the individual tubes, resistors, and capacitors is converted into a mathematical system of equations which is numerically solved to produce the exact same sound as a real circuit. But while the original consumed large amounts of CPU power to compute the solutions in real-time, TS-2 uses large tables of pre-computed solutions. The Saturation section of TS-2 runs about 7x faster than the original and yet the modelling is even more accurate. TS-2 includes the original circuit simulation of the three band Baxandall type EQ as found in many guitar amplifiers.

TS-2 has many other features. You can switch between 12AX7 and 12AU7 tubes for different harmonic characteristics. The EQ can be switched to run pre or post saturation. Saturation and EQ are separately switchable. Also there is a 2x oversampling mode using a very high quality resampling algorithm. Use 2x mode to attenuate aliased distortion harmonics. Use the mix control to blend the processed sound with the original. And finally, TS-2 has a gorgeous interface.

Highlights
Accurate tube preamp simulator using circuit simulation technology
Two common cathode preamp stages
12AX7 and 12AU7 tube models
Drive control for distortion adjustment
Baxandall 3-band analog EQ
Saturation and EQ bypass switches
High quality 2X oversampling mode
Wet/dry mix control
Analog style metering
No latency
Up to 192 kHz sampling rate
Mono or stereo