SPL HawkEye 包含一套多功能音频测量工具。您可以使用电平表、响度计、比特监视器、矢量示波器和频谱分析仪。比特深度分析和高频监听等独特功能，为您打开了探索高分辨率音频录音世界的全新窗口。
达到目标电平并修复混音问题
使用电平表监控您的混音，确保留出足够的动态余量；避免音乐上传到 Spotify、iTunes 和 TIDAL 时出现失真。使用响度计设定特定的综合响度电平，防止曲目的电平因流媒体服务而降低或升高（或受到限制）。揭示与比特使用、深度、分布和直流偏移相关的数字信号问题。使用矢量示波器识别相位相关问题，这些问题会降低混音的活力，并使用频谱分析仪精确定位有问题的共振点。
简洁灵活的图形用户界面
图形用户界面 (GUI) 遵循航空工业驾驶舱仪表设计指南。 HawkEye 将所有信息清晰地呈现，最大限度地减少长时间使用造成的眼部疲劳。HawkEye 的主视图在一个窗口中显示所有测量仪器。任何仪器都可以双击移除，并在其可调整大小的窗口中使用，从而允许您重新定位仪器，使其最适合您的屏幕。
功能
左、右、中、侧真实峰值和均方根 (RMS) 测量。
dB 全量程和 Katz 量程。
dBTP 保持和下降数字显示。
响度计，可显示峰值响度比 (PLR)、峰值瞬时响度比 (PMR)、峰值短期响度比 (PSR)、积分响度 (IL)、瞬时响度 (ML) 和短期响度 (SL)。
时间线响度显示。
LU 目标选择。
响度范围直方图。
64 位比特监视器。
真实位深显示。
比特模式和分布时间线。
直流 (DC) 偏移表，最高可达 -40 dB。
矢量示波器，显示立体声平衡、立体声宽度和单声道兼容性细节。
发光滑块，定义矢量示波器信号在屏幕上的停留时间。
平衡表，帮助您识别混音是否过度偏左或偏右。
相位相关表，帮助您最大限度地提升冲击力。
频谱分析仪，带有频谱图、全景/相位和 1/3 倍频程视图。
SPL HawkEye includes a versatile set of audio measurement instruments. Access a Level Meter, Loudness Meter, Bit Monitor, Vector Scope, and Spectrum Analyzer. Unique features like bit-depth analysis and high-frequency monitoring offer a new window into the world of high-resolution audio recordings.
Hit Target Levels and Fix Mix Issues
Monitor your mixes with the Level Meter to ensure you leave enough headroom; avoid distortion when your music is uploaded to Spotify, iTunes, and TIDAL. Target specific integrated loudness levels using the Loudness Meter to prevent your tracks from being reduced in level or increased in level—and limited—by streaming services. Reveal problems in digital signals related to bit usage, depth, distribution, and DC offset. Identify phase-related issues that suck the life out of your mixes using the Vector Scope and pinpoint problematic resonances with the Spectrum Analyzer.
Clean and Flexible GUI
The graphical user interface (GUI) follows aviation industry guidelines for designing cockpit instruments. HawkEye presents all information uncluttered, minimizing eye strain over extended periods of use. HawkEye's main view shows all measurement instruments within a single window. Any instrument can also be undocked and used within its own resizable window by double-clicking on it, allowing you to reposition the instrument to best fit your screen.
FEATURES
Left, Right, Mid, and Side True Peak and RMS Metering.
dB full scale and Katz-Scales.
dBTP Hold and falling numeric displays.
A Loudness Meter that can display Peak to Loudness Ratio (PLR), Peak to Momentary Loudness Ratio (PMR), Peak to Short-Term Loudness Ratio (PSR), Integrated Loudness (IL), Momentary Loudness (ML), and Short-Term Loudness (SL).
Timeline loudness display.
LU target selection.
Loudness range histogram.
64-bit Bit Monitor.
Real bit-depth display.
Bit pattern and distribution timeline.
Direct current (DC) offset meter up to -40 dB.
Vector Scope that reveals stereo balance, stereo width, and mono compatibility details.
Luminescence slider that defines how long the Vector Scope signal stays on the screen.
Balance meter to help you identify if your mix pulls too much to the left or right.
Phase correlation meter to help you maximize punchiness.
Spectrum Analyzer with Spectrogram, Pano/Phase, and 1/3 Octave view. |
