NAM Universal 是终极 NAM 加载器。
我们与 Wavemind 音频插件、The Ampsim Universe 团队以及负责 GUI 设计的 Luan Albani 合作，为您呈现 NAM Universal。我们借鉴了 Steve Atkinson 的 Neural Amp Modeler 代码，并根据用户最希望 NAM 具备的功能进行了扩展。我们还提供了额外的模块，帮助您在吉他音色离开插件之前轻松雕琢音色。
功能：
- 真正的立体声输入和输出 - 现在，您可以将吉他音轨路由到带有 NAM Universal 的总线/发送端，并保持音轨的立体声声像关系。现在，您可以将立体声效果器（例如调制/延迟等）添加到 NAM-U 中。您是否想在立体声鼓音轨/总线上使用录音室设备的前置放大器/磁带/色彩配置文件，而无需加载两个实例？现在您可以做到。
- 调音器。
- 预设保存/调用。
- 踏板配置文件加载器 - 加载您的 NAM 踏板捕捉或前置放大器。
Instigator 模块 - 这是 Mesa Boogie MK2C+ 音箱头的建模音色堆栈。它非常适合丰润干净的低增益音色，或提亮暗淡的音箱/箱体配置文件或 IR。启用后，它会增强增益和 EQ 整形。
- 音箱配置文件加载器 - 这是您常用的 NAM 音箱配置文件加载器。加载音箱配置文件，或者如果在 Pedal Profile Loader 模块中使用前级放大器配置文件，请使用它加载功率放大器捕捉。如果内容/配置文件创建者在特定配置文件中启用了此功能，则会进行标准化。
- AGGRAVATOR 模块 - TIGHT 并非全频压缩器，而是一个简化的单旋钮 Andy Sneap Waves C4 技巧，专门设计用于在进行 chug/palm mutes 时，仅降低一小段过强的共振低频。它会保留这些低频，只是降低它们的音量，只需稍微降低一点就能达到很好的效果。
- SMOOTH 旋钮的功能与动态均衡器相同，只是起到了去咝声的作用，用于控制更刺耳的中高频和高音频段。
它们与 OOMPH（增加低音）和 SPARKLE（增加高音）旋钮相互作用频繁，您可以利用 Pultec EQ 低音混音技术来增加谐波，并抑制增强的共振。
- 双脉冲响应加载器 - 用于音箱 IR。
- 输入 - 门限（Wavemind 的噪声门）- 输出。
NAM Universal is the ultimate NAM loader.
In collaboration with Wavemind audio plugins and our team at The Ampsim Universe and Luan Albani doing the GUI design, we present to you NAM Universal. We have taken Steve Atkinson's Neural Amp Modeler code and expanded upon it with the most asked for feature requests people wish NAM had. We have given you additional modules to help easily sculpt your guitar tone before it leaves the plugin.
Features:
- True Stereo In and Out - Now you can route guitar tracks to a bus/send with NAM Universal on it, and keep the stereo panning relationship of tracks. Now you can use stereo effects into NAM-U such as modulation/delay etc. Did you want to use studio gear preamps/tape/colour profiles on a stereo drum track/bus without loading two instances?now you can.
- Tuner.
- Preset saving/recall.
- Pedal Profile Loader - load your NAM pedal capture or a preamp.
Instigator Module - This is a modeled tonestack from a Mesa Boogie MK2C+ amp head. It is great for fattening clean and low gain tones, or brightening a dark amp/cab profile or IR. It adds gain and EQ shaping whenever enabled.
- Amp Profile Loader - This is your normal standard NAM amp profile loader. Load an amp profile, or if using a preamp profile in the Pedal Profile Loader module, use this to load in a power amp capture. Normalization will happen if the content/profile creator has that enabled within the specific profile.
- The AGGRAVATOR Module - The TIGHT is not a full frequency range compressor but a simplified one knob Andy Sneap Waves C4 trick tailored to duck only a narrow range of the overbearing resonant low end bass frequencies you get from when you do chugs/palm mutes. It keeps them in, just lowers the volume of them, and a little goes a long way.
- The SMOOTH knob does the same dynamic EQ thing, only acting as a de-esser to control higher harsh high-mid and treble frequency areas.
They interact a lot with the OOMPH (adds bass) and SPARKLE (adds highs) knobs and you can kind of do the Pultec EQ bass mixing technique to add harmonics and also tame the resonance of the boosts.
- Dual Impulse Response Loader - for cabinet speaker IRs.
- Input - Gate (Wavemind's noise gate) - Output.
|
