<<<返回首页

支持系统：Windows  MAC

音源厂商：https://www.facebook.com/Yriisem

独立安装程序 PC  + MAC

文件大小：52MB

YS-我的VoxBox_混音音频插件。这不是著名设备的精确复制品，但其用户手册中的基本特征被作为基础。压缩机有一个逐步模式的启动和释放设置开关，有五个固定设置和平滑设置。XFRM为声音添加了谐波。De Esser可以在探测器的窄带上以全宽谱模式（wide）工作，并在模式（Split）下仅针对所选频率分为四个窄带。在限制器模式下，该模块的工作方式类似于经典的L2a。三频段均衡器具有固定的频率设置。低频和高频从"铃"切换到"架"。低频和高频截止滤波器控制的显示由拨动开关（滤波器均衡器）切换。熵：在通道之间创建均衡器频率和饱和度的随机小差异，模拟模拟控制台通道的差异。FLUX-EQ：使用四个不同频率、不同速度的发生器产生振荡，为声音增添饱满感。FLUX：在通道之间产生几乎不可察觉的音量变化，模拟磁带录音机的运动。VU：音量指示器有三个可选箭头：输入（白色）、压缩（红色）、输出（黑色）。通过在菜单中单击数字（zero-VU-6）进行选择，可以将指示器校准为零。LUFS：要更新指示器，您需要单击数字。如果由于视频卡较弱而未显示控件，则用Resources文件夹中较小的渲染器Knob 101或Knob 51替换插件文件夹根目录中的图像。默认情况下，所有元素都设置为与帧201平滑切换。

YS - MY VoxBox_ Audio plugin for mixing. This is not an exact copy of the famous device, but its basic characteristics from the user manual were taken as a basis. The compressor has a switch for attack and release settings in a step-by-step mode with five fixed settings and smooth. XFRM adds harmonics coloring the sound. De-Esser can work in a full wide spectrum mode (Wide) of operation on narrow bands of the detector and divided into four narrow bands in the mode (Split) only for the selected frequency. In limiter mode, this module works like a classic L2a. Three-band equalizer has fixed frequency settings. Low and high frequencies are switched from "bell" to "shelf" Display of low and high frequency cutoff filter controls are switched by a toggle switch (Filter-EQ). ENTROPY: Creates random small differences in equalizer frequencies and saturation between channels, simulating the differences in channels of an analog console. FLUX-EQ: Creates oscillations with four generators at different frequencies at different speeds, adding fullness to the sound. FLUX: Creates barely noticeable volume changes between channels, simulating the movement of a tape recorder. VU: Has three selectable arrows for the volume indicators: input (white), compression (red), output (black). Calibration of indicators equal to zero can be done by selecting in the menu by clicking on the numbers (zero-VU-6) LUFS: To update the indicators, you need to click on the numbers. If the controls are not displayed due to a weak video card, then replace the images in the root of the plugin folder with a smaller renderer from the Resources folder, Knob 101 or Knob 51. By default, all elements are set for smooth switching with frame 201.