跟叔叔来，好好听！
听听天使的号角和魔鬼的长号。你被邀请了！
ValhallaShimmer是一种算法混响器，专为从音乐厅到泰姬陵再到瓦尔哈拉大厅的大声音而设计。所有滑块的设计都是为了实时调整，并具有平滑的响应，以避免在更改设置或自动化控制时点击。同时，该算法经过了高度优化，因此您可以在不占用CPU的情况下获得巨大的混响声音。
ValhallaShimmer的核心是一种高质量的混响器，旨在产生平稳的衰减，既致密又无色。
有几种混响模式可供选择：
-通过调整反馈、扩散和大小控制，可以微调混响信号的起始、维持和衰减。
-调制控制可以设置为产生微妙的模式加厚、闪亮的弦乐合奏式衰减，以及旧Lexicon-hall算法的独特随机调制。
-双音控制和颜色模式选择器允许将音色从明亮闪亮调整到更自然的暗衰减，类似于大空间中空气吸收产生的衰减。
此外，ValhallaShimmer能够对反馈信号进行音调偏移。
有5种变桨模式可供选择：
-Single，其中反馈根据Shift值向上或向下移动。
-Dual，其中反馈通过Shift值向上和向下（并行）移动。
-SingleReverse，其中每个颗粒在音高偏移之前都会反转。这使得音调转换声音比单模式更平滑。
-双反转。与双模式类似，但具有反向纹理，可实现更平滑的音调转换声音。
-旁路，关闭音调转换（对"标准"混响声音有用）。
通过将Shift量设置为+12半音，将Feedback设置为0.5或更大，可以产生经典的Eno/Lanois"微光"声音（在此处、此处和此处了解更多信息）。该算法可以产生各种各样的其他声音，从弹簧式混响到"反向"混响，再到通常与高端硬件处理器相关的闪闪发光的音调偏移垫。
主页
Come With Uncle And Hear All Proper!
Hear Angel Trumpets And Devil Trombones. You Are Invited!
ValhallaShimmer is an algorithmic reverb designed for BIG sounds, from concert halls to the Taj Mahal to the Halls of Valhalla. All of the sliders have been designed to be tweaked in real time and have a smoothed response to avoid clicks when changing settings or automating the controls. At the same time, the algorithm has been highly optimized, so you get a huge reverb sound without straining your CPU.
At its core, ValhallaShimmer is a high quality reverberator, designed to produce a smooth decay, that is both dense and colorless.
There are several reverberation modes available:
- By adjusting the Feedback, Diffusion and Size controls, the attack, sustain and decay of the reverb signal can be fine tuned.
- The modulation controls can be set to produce subtle mode thickening, glistening string ensemble-esque decays, and the distinctive random modulation of the older Lexicon hall algorithms.
- Two tone controls and the Color Mode selector allow the timbre to be adjusted from bright and glistening to a more natural dark decay, similar to that produced by air absorption in large spaces.
In addition, ValhallaShimmer has the ability to pitch shift the feedback signal.
There are 5 pitch shift modes available:
- Single, where the feedback is shifted up or down by the Shift value.
- Dual, where the feedback is shifted both up and down (in parallel) by the Shift value.
- SingleReverse, where each grain is reversed before it is pitch shifted. This results in a smoother pitch shifting sound than the Single mode.
- DualReverse. Similar to the Dual mode, but with reversed grains, for a smoother pitch shifting sound.
- Bypass, which turns off the pitch shifting (useful for "standard" reverb sounds).
By setting the Shift amount to +12 semitones, and the Feedback to 0.5 or greater, the classic Eno/Lanois "shimmer" sound is produced (learn more about that here, here and here). A wide variety of other sounds can be created by the algorithm, ranging from spring-esque reverbs to "reverse" reverbs, to glistening pitch shifted pads that are usually associated with high end hardware processors.
home page |
