速率（调制频率）
控制调制延迟振荡的速度（以Hz或BPM为单位）
阶段。
调整左右信号振荡之间的相移（如果是立体声）。
深度
确定调制的强度，或延迟与基准时间（分钟）的差异程度。
最小（最小延迟）
设置应用于延迟信号的最小延迟（毫秒）。
反馈（再生）
控制有多少延迟信号被反馈到输入端，从而产生谐振。
干/湿（原始/处理信号平衡）
调整原始（干）和处理（湿）信号之间的混合。
Rate (Modulation Frequency)
Controls the speed at which the modulated delay oscillates (in Hz or BPM)
Phase.
Adjusts the phase shift between the oscillations of the left and right signals (if in stereo).
Depth
Determines the intensity of the modulation, or how much the delay varies from the base time (min).
Min (Minimum Delay)
Sets the minimum delay (in ms) applied to the delayed signal.
Feedback (Regeneration)
Controls how much of the delayed signal is fed back into the input, creating resonance.
Dry/Wet (Original/Processed Signal Balance)
Adjusts the mix between the original (dry) and processed (wet) signals.
|
