Percolate是一种立体声管放大器，在尽可能深的层次上建模，包括电路中每个组件的模型。
它是一个立体声两级放大器，带有输入和输出变压器、前置放大器级、音调控制、功率推挽级和输出混音（干湿）控制。
有两个输出抽头可供选择：前置放大器和功率级。第一阶段需要更高的输入电平来饱和，饱和度更清晰。输出级具有更丰富、更平滑的饱和度。
输入变压器有两种选择：透明和铁（多种颜色）。
输出变压器有两种选择：高保真和铁（最大的区别在于低频范围）。
控制：
输入增益。从衰减到增强，只影响进入管放大器的信号（不影响通过混音控制获得的干分量）。
音调控制。影响通过管电路的信号（不影响干信号）。将其与混音控件一起使用，以设置已处理曲目的声音。
输入仪表。将左右液位计分开，它们是设置饱和度时的参考。尝试不同的输入电平，为前置放大器和功率级输出抽头设置参考。
搅拌螺丝。混合处理和（样品对齐）干燥信号。使用它来混合两个信号版本，以获得最佳的最终结果。
音量控制。整体输出增益控制。电源关闭时忽略。
电源开关。绕过整个系统。
Percolate is a stereo tube amplifier, modelled at the deepest possible level, including a model for every single component in the circuit.
It is a stereo, two stages amplifier, with input and output transformers, preamplifier stage, tone control, power push-pull stage and output mix (wet-dry) control.
Two output taps are available: preamplifier and power stage. The first stage requires higher input level to saturate and the saturation is crisper. The output stage has a richer and smoother saturation.
Two options for the input transformer: transparent and iron (lots of color).
Two options for the output transformer: hi fidelity and iron (biggest difference is in the low frequency range).
Controls:
Input Gain. From attenuation to boosting, affects only the signal going into the tube amplifier (not the dry component, available through the Mix control).
Tone control. Affects the signal going through the tube circuit (doesn't affect the dry signal). Use it together with the Mix control to set the sound of your processed track.
Input meters. Separate left and right level meters, they are a reference when setting the amount of saturation. Experiment with different input levels to set a reference for both pre-amplifier and power stage output taps.
Mix screw. Blends processed and (sample-aligned) dry signal. Use it to mix the two signal versions for the best final result.
Volume control. An overall output gain control. Bypassed when Power is off.
Power switch. Bypasses the whole system. |
