Metaplugin是一个加载其他插件的插件。就这么简单。使用您硬盘上已有的任何VST/VT3（以及AU，如果您在Mac上）效果，使用此插件包装器构建您自己的效果网络。为了让你开始，软件包中包含了一个中间矩阵、一个四频交叉滤波器和一个路由插件。这意味着即时跨轨路由、中间、多频带压缩/失真/混响/……应有尽有。
当然，这只是开始……让你的想象力自由发挥，没有什么是不可能的，从创建自己的分层合成器声音到使用简单的模块从头开始构建整个声音发生器。
Metaplugin的另一个最受欢迎的用例是在Pro Tools中加载VST插件（或者如果你在Mac上，在Pro Tools上加载AudioUnits）。因此，您可以将其用作VST到AAX的包装器或AU到AAX包装器。当我们开始时：您还可以使用Metaplugin在Logic/LogicX中加载VST插件（VST到AU包装器），或在Cubase中加载AU插件（AU到VST包装器）。
效果版本最多支持八个单独的声道，例如环绕声或其他多声道用途。
乐器版本具有16个立体声输出总线，可用于使用多通道乐器的所有可能的布线目的
DAW和插件格式支持时的双精度音频处理（不适用于音频单元）
附加立体声侧链输入
方便的插件管理器：扫描一次插件，然后将它们拖放到图形区域
从32位到64位的内部桥接，具有无缝的插件窗口集成：在ProTools或LogicPro X中加载32位插件，无需第三方桥接解决方案
自v3.4以来的新功能：从64位到32位的内部桥接！
支持原生Apple Audio Unit插件
可以为每个加载的插件调整干/湿比。
每个加载的插件都有单独的旁路
包括完整的插件延迟补偿。
通过将多达100个参数映射到加载插件的任何参数上来实现自动化
可忽略的额外CPU开销。
合成器也可以用任何MIDI控件加载和播放，这意味着您可以使用现有的构建块创建自定义合成器。
整个信号链提供高达8倍的过采样选项。
包括：中间矩阵、多频带分离器和交叉轨道发送/接收辅助插件。
为插件定义自己的调色板：检查！
可自由调整大小的插件窗口，以获得最大的便利：检查！
可以用作VST（2或3）到AU的包装器、VST（3或2）到AAX的包装器或AU到AAX包装器。
老实说，我们想不出任何理由不拥有这个孩子！适用于Windows（32/64位VST/VT3和AAX）和Mac OSX（32/66位VST/VT3/AU/AAX，需要10.7或更高版本）。一如既往，我们强烈建议查看演示版本（设置未保存，但功能更全面），看看它是否符合您的需求！
Metaplugin is a plugin that loads other plugins. As simple as that. Build your own effect networks with this plugin wrapper using any VST/VST3 (and AU, if you're on Mac) effect you already have on your harddisk. To get you started, a Mid-Side matrix, a fourband crossover filter and a routing plugin are included in the package. This means instant cross-track routing, mid-side, multiband compression/distortion/reverb/… you name it.
Of course that's only the beginning… let your imagination run free, nothing is impossible, from creating your own layered synth sounds to building whole sound generators from scratch using simple modules.
Another favourite use case for Metaplugin is to load VST plugins in Pro Tools (or to load AudioUnits in Pro Tools if you're on a Mac). Hence, you can use it as a VST to AAX wrapper or an AU to AAX wrapper. While we're at it: you can also use Metaplugin to load VST plugins in Logic/LogicX (VST to AU wrapper), or AU plugins in Cubase (AU to VST wrapper).
Effect version supports up to eight individual channels for, e.g. surround or other multichannel purposes.
Instrument version featuring 16 stereo output buses for all conceivable routing purposes using multichannel instruments
Double precision audio processing when supported by DAW and plugin format (not for Audio Units)
Additional stereo sidechain input
Convenient plugin organizer: scan your plugins once, then just drag and drop them onto the graph area
Internal bridge from 32 to 64 bit, with seamless plugin window integration: load 32 bit plugins in ProTools or LogicPro X without the need for a 3rd party bridging solution
NEW since v3.4: internal bridge from 64 bit to 32 bit too!
Support for native Apple Audio Unit plugins
Dry/wet ratio can be adjusted for each loaded plugin.
Individual bypass for each loaded plugin
Full plugin delay compensation included.
Automate up to 100 parameters by mapping them on any parameter of a loaded plugin
Negligible additional CPU overhead.
Synths can also be loaded and played with any MIDI control, which means you can create custom synthesizers with existing building blocks.
Up to 8x oversampling option of the whole signal chain is available.
Included: mid-side matrix, multiband splitter and cross track send/receive helper plugins.
Define your own colour palette for the plugin: check!
Freely resizable plugin window for maximum convenience: check!
Can be used as a VST (2 or 3) to AU wrapper, a VST (2 or 3) to AAX wrapper or an AU to AAX wrapper.
Honestly, we can't think of any reason not to own this baby! Available for Windows (32/64 bit VST/VST3 and AAX) and Mac OSX (32/64 bit VST/VST3/AU/AAX, 10.7 or higher needed). As always, we strongly recommend to check out the demo version (settings not saved, but further fully functional) to see whether it fits your needs! |
