动态均衡器。DSEQ是一个在频域中工作的动态处理器。DSEQ可自动调整频带，可动态消除数字噪声。
DSEQ可用于所有混音和主混音情况：
-德辛声乐
-驯服鼓、吉他、录音中的共鸣
-消除数字粗糙度
-平衡混合
-去掩蔽频率区域
-支持粉红噪声混音/母带制作
DSEQ完全在频域中工作，由于自调节动态均衡器，提供了非常高的频率选择性。DSEQ以最高的透明度完成工作，甚至是大力推动。即使使用非常关键的声音材料，也可以避免失真、相位和伪影。DSEQ提供多种质量模式，甚至可以驯服奇异频率。
在顶部，DSEQ提供了一个非常易于使用的界面。只需几个参数（阈值、选择性和攻击/释放），就可以覆盖广泛的应用。即使是初始参数集也可以使您的混音更加透明。只需选择阈值参数并逐步降低。从那里，您可以通过使用预滤波器开始关注特定的频率区域。
DSEQ附带AB-LM Lite，提供感知响度匹配。
DSEQ支持自定义阈值，将DSEQ变成智能多频带压缩器。
DSEQ2引入了智能AI功能和相应的GUI页面，可根据输入材料自动设置DSEQ。
DSEQ3引入了增益降低光谱仪和免费的GUI缩放和调整。
特征：
-智能AI功能，
-智能AI GUI页面
-自适应斜率
-自适应阈值
-平滑线性/自然相位动态滤波器
-全频率范围处理，10Hz–22kHz
-7种不同的质量模式：生态生态、生态、普通、高超、超2/3
-左/右和中间/侧面处理
-探测器信号的全局斜率（例如粉红噪声混合/母带制作）
-自定义阈值曲线
-增益降低极限
-压缩控制
-自动最优坡度参数计算
-自动最优阈值参数计算
-12个独立的预滤波器频带，模拟/数字风格
-侧链支撑
-参数A/B
-撤消/重做
-多种信号监测模式（预滤波、增量、侧链）
-多种频谱分析模式（立体声、左、右、中、侧）
-感知响度匹配（由AB-LM Lite提供支持）
-扩展输入/输出表，峰值/RMS/EBU/VU
-窄带扫频模式
-所有处理模式的精确旁路切换示例
-采样率最低可达192 kHz
-"真实"过采样，高达4倍
-离线渲染模式
-增益降低光谱仪
-EQ备忘单
-谱斜率的连续计算
-精确参数输入
-易于使用的GUI
-免费GUI缩放和调整大小
-许多预设，包括智能AI设置
-预设管理，包括自定义设置
-全面的DAW自动化支持
-64位内部处理
-非常高效的CPU使用率设计
-智能静音处理
-产品需要使用许可证密钥激活
-DSEQ客户免费更新
Dynamic equalizer. DSEQ is a dynamic processor working in the frequency domain.DSEQ removes digital harshness on the fly thanks to self-adjusting frequency bands.
DSEQ can be used in all mix and master situations:
- de-essing vocals
- taming resonances in e.g. drum, guitar, vocal recordings
- removing digital harshness
- balancing the mix
- de-masking frequency regions
- support of pink noise mixing/mastering
DSEQ works fully in the frequency domain, providing very high frequency selectivity thanks to self-adjusting dynamic equalizers. DSEQ does its job with highest transparency even pushed hard. This avoids distortion, phasing and artefacts even with very critical sound material. And DSEQ offers several quality modes taming even singular frequencies.
On top DSEQ provides a very easy to use interface. With just a few parameters (threshold, selectivity and attack/release) a broad range of applications can be covered. Even the initial parameter set could make your mix more transparent. Just pick the threshold parameter and lower it step by step. From there you can start focusing on specific frequency regions by using the pre-filters.
DSEQ comes with AB-LM Lite providing perceptual loudness matching.
DSEQ supports custom threshold which turns DSEQ into a smart multiband compressor.
DSEQ2 introduces the smart AI function and a corresponding GUI page to setup DSEQ automatically depending on the input material.
DSEQ3 introduces gain-reduction spectrograph and free GUI scaling and resizing.
FEATURES:
- smart AI function,
- smart AI GUI page
- adaptive slope
- adaptive threshold
- smooth linear/natural phase dynamic filter
- full frequency range processing, 10Hz – 22kHz
- 7 different quality modes: eco eco, eco, normal, high and ultra, ultra 2/3
- left/right and mid/side processing
- global slope for detector signal (e.g. pink noise mixing/mastering)
- custom threshold curve
- limit of gain reduction
- compression control
- automatic optimal slope parameter calculation
- automatic optimal threshold parameter calculation
- 12 independent pre-filter bands, analogue/digital style
- side-chain support
- parameter A/B
- undo/redo
- multiple signal monitoring modes (pre-filter, delta, side chain)
- multiple spectrum analyzing modes (stereo, left, right, mid, side)
- perceptual loudness matching (powered by AB-LM Lite)
- extended input/output meter, Peak/RMS/EBU/VU
- narrow-band sweeping mode
- sample-exact bypass toggle for all processing modes
- sample rates min. up to 192 kHz
- "real" over sampling, up to 4x
- offline render modes
- gain reduction spectrograph
- EQ cheat sheets
- continuous calculation of the spectrum slope
- precise parameter input
- easy to use GUI
- free GUI scaling and resizing
- many presets including smart AI setups
- preset management including custom setups
- full DAW automation support
- 64-bit internal processing
- very efficient CPU usage design
- smart silence processing
- product needs to be activated with license key
- free update for DSEQ customers |
